أفضل ملاءمة
Chilled products that can be accepted within 0-10°C and need a passive, carton-friendly EPS shipper for controlled distribution.
0-10°C EPS Insulated Box Solution
0-10°C EPS Insulated Box Packout for Chilled Cold Chain Shipments
For chilled products allowed to travel within 0-10°ج, Tempk can supply a passive EPS packout using 0°C biological ice packs. In the tested 9L payload layout, all measured positions stayed within 0-10°C for at least 39 hours under a 27.7-33.3°C ambient profile.
0-10°ج
Target holding range for chilled products that allow 0-10°ج.
39ح
Conservative duration from the shortest measured position.
9ل
Usable product space after the ice packs are placed.
12 × 500ز
0°C biological ice packs used in the tested layout.
Buyer Decision
Use this packout when the product acceptance range is 0-10°ج
This solution helps buyers decide whether the tested 9L EPS packout matches their product, payload and route risk before moving to samples or bulk quotation.
When to choose another packout
If your label, SOP or customer specification requires a narrower range such as 2-8°ج, validate a dedicated packout instead of assuming this 0-10°C case will fit.
What was tested
The setup uses a 9L effective payload area, 12 pieces of 500g 0°C ice packs and an ambient profile of 27.7-33.3°ج.
Packout Details
9L effective payload space with EPS insulation and 0°C ice packs
Because the ice packs are packed inside the shipper, the usable product space is smaller than the full box volume. For ordering and sample planning, the 9L payload space is the value to check first.
| المعلمة | Value Used in This Packout |
|---|---|
| EPS box external dimensions | 375 × 345 × 315 مم |
| EPS box internal dimensions | 295 × 265 × 255 مم |
| سمك الجدار | 40 مم |
| Nominal EPS box volume | 20 ل |
| Effective payload space | 230 × 200 × 195 مم, تقريبًا 9 ل |
| EPS box weight | 0.48 كجم |
| وسائط التبريد | 12 pieces of 500g 0°C biological ice packs |
| Ice pack dimensions | 210 × 135 مم |
| Total cooling media weight | 6.0 كجم |
| Total box plus ice pack weight | 6.48 kg before product payload |
Plan around the 9L product space. The EPS box is listed as 20L, but the ice packs occupy part of the interior during shipment.
Temperature Test Result
0-10°C performance under a 27.7-33.3°C ambient profile
The test curve shows why 39 hours is the practical planning number for this packout. In the measured positions, the top point reached the 0-10°C limit first.
39ح
Shortest 0-10°C duration among the measured positions.
| Measured Position | Duration Maintaining 0-10°ج |
|---|---|
| قاع | 45.1 ساعات |
| مركز | 44.8 ساعات |
| قمة | 39 ساعات |
The test was run at 27.7-33.3°ج, with an average ambient temperature of 31.1°ج. Before approving a live route, also check product mass, الشروط المسبقة, طريقة التعبئة, وقت العبور, ambient exposure and handling events.
Before Ordering
What to check before samples or bulk orders
Use the test result together with your product window, payload size and route conditions. These checks help decide whether this setup is ready for sampling or needs adjustment first.
Confirm the product window
Choose this setup only when the product can accept 0-10°ج. A stricter labeled range needs its own packout and test acceptance rule.
Check payload fit
The tested effective payload space is 230 × 200 × 195 مم. Oversized payloads change air space, coolant contact and thermal performance.
Match the route conditions
The test was run around 31.1°C average ambient. Hotter routes, long handoffs or storage delays should be tested before procurement.
خطط حولك 39 ساعات
The top position reached the limit first. يستخدم 39 hours as the conservative planning duration from this data set.
دليل الاختيار
When to use this box and when to change the packout
This EPS design is a practical starting point for small chilled shipments. If the payload, route or reuse requirement changes, Tempk should compare box size, insulation material and coolant layout before sampling.
Use this 9L EPS packout
Your product accepts 0-10°ج, the payload fits the 230 × 200 × 195 mm effective space, and the lane risk is close to the tested ambient profile.
Request a larger EPS or adjusted coolant layout
Your payload is larger, heavier or needs a different product-to-coolant separation method. The test should be repeated after resizing.
Consider reusable EPP, PU or VIP options
Your operation requires returnable packaging, stronger handling resistance or longer route control. Material choice should be based on route, budget and reuse model.
Build a separate design for tighter ranges
Do not use this 0-10°C packout as evidence for 2-8°ج, frozen or ultra-cold shipments unless a separate test confirms that exact requirement.
RFQ Checklist
Details Tempk needs to recommend the right chilled packout
Send these details so Tempk can check whether this 9L EPS packout is suitable or whether a modified design and sample test are needed.
متطلبات المنتج
Allowed temperature range, حساسية المنتج, خطر التجميد, payload weight and product dimensions.
الملف الشخصي للطريق
وقت العبور, expected ambient temperature, وقت إقامة المستودع, handoff points and final delivery condition.
Packout target
EPS, إي بي بي, PU or reusable preference, نوع المبرد, حجم المربع, وضع العلامات, carton requirements and target order quantity.
Testing plan
Required duration, sensor positions, acceptance criteria and whether sample validation is needed before bulk production.
Commercial planning
Sample quantity, estimated monthly volume, shipping destination and packing labor requirements.
وثائق الامتثال
Any internal SOP, customer specification or labeling rule that defines the temperature acceptance window.
Buyer Questions
Common questions for 0-10°C EPS insulated box projects
How long did this packout maintain 0-10°ج?
The shortest measured position maintained 0-10°C for 39 ساعات. The bottom and center positions measured 45.1 ساعات و 44.8 ساعات على التوالي.
What box and coolant configuration was tested?
The tested packout used an EPS insulated box with 9L effective payload space and 12 pieces of 500g 0°C biological ice packs.
Can this be used for every chilled product?
لا. It should be used only when the product accepts a 0-10°C window. Products with tighter, frozen or ultra-cold requirements need a dedicated packout and test.
Why is the effective payload space smaller than the box volume?
The EPS box is listed as 20L, but the tested product space is approximately 9L because the 12 ice packs occupy space inside the packout.
Can Tempk adjust this packout for other routes?
نعم. Tempk can compare box size, مادة عازلة, coolant quantity and packing method, then prepare a sample test for the target route and product.
What should be sent with the quotation request?
Send the temperature range, حجم الحمولة والوزن, وقت العبور, ملف تعريف المحيط, وجهة, expected order volume and any required test criteria.
Need a 0-10°C insulated box packout for your route?
Share your product temperature window, حمولة, route duration and purchase plan. Tempk can check whether this 9L EPS packout is enough or compare it with modified EPS, reusable EPP, PU or VIP options before sample testing and bulk procurement.
اتصل بـ Tempk