Cold Chain Coolant Tool

جدول مرجعي لوسائط التبريد ومواد PCM لتغليف سلسلة التبريد

Compare common refrigerants and phase change materials by phase-change point, الحرارة الكامنة, specific heat, freezing expansion, preconditioning need, and typical cold-chain use case before you prepare a packout or quotation request.

°ج
Phase-change point for lane matching
كيلوجول/كجم
Latent heat reference range
%
Freezing expansion planning range

اختيار سريع لوسيط التبريد

Use the table to compare technical ranges, typical lane fit, and handling notes. Values are planning references; exact specifications vary by formulation, حجم العبوة, هيكل الفيلم, and conditioning SOP.

آخر مراجعة: 18 يونيو 2026






Common coolant and PCM planning values for cold-chain packaging comparison.
يقارن سائل التبريد / بي سي إم Phase-change point الحرارة الكامنة Specific heat Expansion on freezing التكييف المسبق الممرات الأنسب Handling note
Water-based flexible gel ice pack
عبوة جل قابلة لإعادة الاستخدام, الحقيبة الناعمة, water-dominant refrigerant gel.
حزمة هلام0-10°ج
Around 0°ج 300-334 كيلوجول/كجم Liquid approx. 4.18; frozen approx. 2.03 kJ/kg*K عن 8-9%; leave headspace in rigid designs. Freeze at -18°C or below until fully solid. طعام مبرد, خضروات, المأكولات البحرية, 0-10°C parcels, buffered 2-8°ج الممرات. Use separator layers for freeze-sensitive payloads. Good low-cost starting point for many chilled packouts.
Rigid ice brick
Hard-shell water or gel-filled brick for repeated handling and longer thermal mass.
الطوب الجليديقابلة لإعادة الاستخدام
Around 0°ج 300-334 كيلوجول/كجم Liquid approx. 4.18; frozen approx. 2.03 kJ/kg*K عن 8-9%; shell geometry must allow expansion. Freeze at -18°ج أو أقل; confirm core is fully frozen. Reusable food distribution, المأكولات البحرية, EPP box programs, insulated delivery boxes. Higher durability than soft pouches. Check direct-contact freezing risk and payload loading pattern.
Conditioned 0°C gel pack
Frozen gel pack warmed or conditioned before loading to reduce product freezing risk.
Conditioned gel2-8°C support
Around 0°ج 280-330 كيلوجول/كجم تقريبا. 3.6-4.2 سائل; 1.8-2.4 frozen kJ/kg*K عادة 6-9%, اعتمادًا على تركيبة الجل. تجميد, then condition to the validated loading state before packout. 2-8°C pharma starter layouts, عينات المختبر, freeze-sensitive chilled goods. Conditioning and separator placement matter more than the material name. التحقق من صحة مع بيانات المسجل.
+5°C PCM pack
PCM لدرجات الحرارة الموجبة designed to release cold near the 2-8°C operating band.
بي سي إمفارما
تقريبا. +5°ج 160-240 كيلوجول/كجم تقريبا. 2.0-4.0 kJ/kg*K by formulation Common planning range 3-8%. Charge below phase point per supplier SOP; avoid uncontrolled over-freezing for validated lanes. 2-8°C pharma, البيولوجيا, اللقاحات, عينات المختبر, freeze-sensitive cool-chain payloads. Often a better starting point than fully frozen gel packs when product freezing is a critical risk.
+20 to +25°C CRT PCM pack
PCM for controlled room temperature shipments where both heat and cold exposure matter.
CRT PCM15-25°ج
تقريبا. +20 to +25°ج 140-220 كيلوجول/كجم تقريبا. 1.8-3.0 kJ/kg*K Often below water ice; use supplier expansion data. Condition within the validated CRT charge window before loading. 15-25°C controlled room temperature medicines and diagnostics. Not a chilled or frozen coolant. It buffers ambient excursions around room-temperature limits.
-5°C PCM or eutectic gel pack
Sub-zero coolant for stronger chilled performance where mild freezing risk can be controlled.
PCM دون الصفرخطر التجميد
تقريبا. -5°ج 180-280 كيلوجول/كجم تقريبا. 2.5-4.0 kJ/kg*K Common planning range 4-10%. Freeze below -10°C or per formulation requirement. المأكولات البحرية, بروتين, high thermal-load chilled freight, longer 0-10°ج الممرات. Use with caution around vaccines, البيولوجيا, leafy produce, and other freeze-sensitive payloads.
-18°C PCM / frozen eutectic pack
Frozen-lane PCM used when the payload must stay near standard frozen distribution temperatures.
PCM المجمدة≤ -18°ج
تقريبا. -18°ج 170-260 كيلوجول/كجم تقريبا. 2.0-3.8 kJ/kg*K Common planning range 4-12%. Charge in a -25°C or colder freezer unless supplier specifies otherwise. أغذية مجمدة, المأكولات البحرية المجمدة, ice cream support, frozen e-commerce parcels. For deep frozen or long air/export routes, compare with dry ice and route-risk controls.
Sodium chloride brine eutectic pack
Salt-water eutectic refrigerant. Eutectic point is near -21.1°C at about 23.3 wt% NaCl.
Brineالمجمدة
Near -21.1°C eutectic point Typical pack planning range 160-240 كيلوجول/كجم تقريبا. 2.0-3.8 kJ/kg*K by concentration Often lower than pure water, but container headspace is still required. Charge below eutectic point, commonly -25°C or colder. الدعم المجمد, تصدير المأكولات البحرية, high thermal-load cold packs. Check corrosion compatibility and leakage control. Do not place directly against freeze-sensitive cargo.
ثلج جاف pellet or block
Solid carbon dioxide coolant that sublimates directly to gas at atmospheric pressure.
CO2Vent required
Sublimes near -78.5°ج عن 571 kJ/kg sublimation energy تقريبا. 0.8-0.9 kJ/kg*K for solid CO2 Not a liquid-freezing pack; gas release requires vented packaging. Use dry ice as supplied; store and handle with ventilation and PPE. مجمدة بعمق, dry-ice-compatible pharma, عينات المختبر, بوظة, frozen air/export lanes. Air shipments require dry ice marking, وزن صافي, قبول الناقل, and dangerous-goods review.
الجليد الطين / الطين الجليد
Fine ice crystals suspended in a carrier fluid for direct chilling or process-side cooling.
SlurryFood process
غالباً -2 to 0°ج, depending on solution تقريبا. 80-250 kJ/kg by ice fraction تقريبا. 3.3-4.2 kJ/kg*K by mixture Depends on ice fraction and storage method. Generated by slurry ice system; not normally charged as a sealed pack. المأكولات البحرية, سمكة, produce processing, short direct-contact cooling workflows. Useful for process cooling, but less common for sealed parcel cold-chain packaging.

جدول معلمات وسائط التبريد ومواد PCM الشائعة

Tick up to three rows to compare the real trade-offs: temperature fit, cooling density, خطر التجميد, conditioning effort, and when each option is usually chosen.

No coolant selected yet.

مقارنة خيارات وسائط التبريد

Estimate the latent energy available from a selected coolant mass. This is not a thermal qualification result, but it helps compare refrigerant formats quickly.



السعة الكامنة المقدرة

0
kJ latent energy
0
Wh equivalent
0
kJ/kg used

Thermal performance also depends on insulation, درجة حرارة الحمولة, ملف تعريف المحيط, وضع الحزمة, ووقت الطريق.

فحص طاقة التبريد الكامنة

The best coolant is not only the coldest material. Match the phase point to the product temperature band, then check heat capacity, expansion, contact risk, تكييف, وضوابط الطريق.

طابق نقطة تغير الطور مع نطاق الحرارة

لمدة 2-8°ج- الشحنات, +5°C PCM or carefully conditioned gel packs often reduce freezing risk. للممرات المجمدة, -18°C PCM, حزم سهل الانصهار, or dry ice may be more appropriate.

استخدم الحرارة الكامنة للمقارنة وليس كضمان

A higher kJ/kg value means more phase-change energy per kilogram, but packout geometry, العزل, كتلة الحمولة, فجوات الهواء, and ambient exposure decide the real hold time.

اترك مساحة للتمدد وخروج الغاز

Water-rich packs expand when frozen. ثلج جاف is different: it sublimates into carbon dioxide gas and must never be sealed in airtight packaging.

كيف تقرأ فرق سلسلة التبريد هذا الجدول

Use this page to shortlist the refrigerant family, then continue with pack quantity, خطر الطريق, التحجيم, and shipment-readiness checks.

للنطاقات المبردة

استخدم حاسبة علبة الثلج to estimate starting cold-media mass for 2-8°C or 0-10°ج- الشحنات.

للنطاقات المجمدة

استخدم حاسبة الثلج الجاف when dry ice, deep frozen cargo, الشحن الجوي, or export handling is part of the route.

عند عدم يقين المسار

استخدم مدقق مخاطر الطريق before finalizing packout assumptions for hot ambient, يسكن الوقت, أو الممرات العابرة للحدود.

احصل على عرض سعر