Paling cocok
Chilled products that can be accepted within 0-10°C and need a passive, carton-friendly EPS shipper for controlled distribution.
0-10°C EPS Insulated Box Solution
Packout Kotak EPS 0-10°C untuk Pengiriman Dingin Rantai Dingin
For chilled products allowed to travel within 0-10°C, Tempk can supply a passive EPS packout using 0°C biological ice packs. In the tested 9L payload layout, all measured positions stayed within 0-10°C for at least 39 hours under a 27.7-33.3°C ambient profile.
0-10°C
Target holding range for chilled products that allow 0-10°C.
39H
Conservative duration from the shortest measured position.
9L
Usable product space after the ice packs are placed.
12 × 500G
0°C biological ice packs used in the tested layout.
Buyer Decision
Gunakan packout ini jika rentang penerimaan produk adalah 0-10 °C
This solution helps buyers decide whether the tested 9L EPS packout matches their product, payload and route risk before moving to samples or bulk quotation.
Kapan memilih packout lain
If your label, SOP or customer specification requires a narrower range such as 2-8°C, validate a dedicated packout instead of assuming this 0-10°C case will fit.
Apa yang diuji
The setup uses a 9L effective payload area, 12 pieces of 500g 0°C ice packs and an ambient profile of 27.7-33.3°C.
Packout Details
Ruang muatan efektif 9 L dengan insulasi EPS dan ice pack 0 °C
Because the ice packs are packed inside the shipper, the usable product space is smaller than the full box volume. For ordering and sample planning, the 9L payload space is the value to check first.
| Parameter | Value Used in This Packout |
|---|---|
| EPS box external dimensions | 375 × 345 × 315 mm |
| EPS box internal dimensions | 295 × 265 × 255 mm |
| Ketebalan dinding | 40 mm |
| Nominal EPS box volume | 20 L |
| Effective payload space | 230 × 200 × 195 mm, sekitar 9 L |
| EPS box weight | 0.48 kg |
| Media pendingin | 12 pieces of 500g 0°C biological ice packs |
| Ice pack dimensions | 210 × 135 mm |
| Total cooling media weight | 6.0 kg |
| Total box plus ice pack weight | 6.48 kg before product payload |
Plan around the 9L product space. The EPS box is listed as 20L, but the ice packs occupy part of the interior during shipment.
Temperature Test Result
Performa 0-10 °C pada profil suhu lingkungan 27,7-33,3 °C
The test curve shows why 39 hours is the practical planning number for this packout. In the measured positions, the top point reached the 0-10°C limit first.
39H
Shortest 0-10°C duration among the measured positions.
| Measured Position | Duration Maintaining 0-10°C |
|---|---|
| Dasar | 45.1 jam |
| Tengah | 44.8 jam |
| Atas | 39 jam |
The test was run at 27.7-33.3°C, with an average ambient temperature of 31.1°C. Before approving a live route, also check product mass, pengkondisian awal, metode pengepakan, waktu transit, ambient exposure and handling events.
Before Ordering
Hal yang perlu diperiksa sebelum sampel atau pesanan massal
Use the test result together with your product window, payload size and route conditions. These checks help decide whether this setup is ready for sampling or needs adjustment first.
Konfirmasi rentang produk
Choose this setup only when the product can accept 0-10°C. A stricter labeled range needs its own packout and test acceptance rule.
Periksa kesesuaian muatan
The tested effective payload space is 230 × 200 × 195 mm. Oversized payloads change air space, coolant contact and thermal performance.
Cocokkan kondisi rute
The test was run around 31.1°C average ambient. Hotter routes, long handoffs or storage delays should be tested before procurement.
Rencanakan 39 jam
The top position reached the limit first. Menggunakan 39 hours as the conservative planning duration from this data set.
Panduan Seleksi
Kapan menggunakan kotak ini dan kapan mengubah packout
This EPS design is a practical starting point for small chilled shipments. If the payload, route or reuse requirement changes, Tempk should compare box size, insulation material and coolant layout before sampling.
Gunakan packout EPS 9 L ini
Your product accepts 0-10°C, the payload fits the 230 × 200 × 195 mm effective space, and the lane risk is close to the tested ambient profile.
Minta EPS lebih besar atau tata letak pendingin yang disesuaikan
Your payload is larger, heavier or needs a different product-to-coolant separation method. The test should be repeated after resizing.
Pertimbangkan opsi EPP, PU, atau VIP reusable
Your operation requires returnable packaging, stronger handling resistance or longer route control. Material choice should be based on route, budget and reuse model.
Buat desain terpisah untuk rentang yang lebih ketat
Do not use this 0-10°C packout as evidence for 2-8°C, frozen or ultra-cold shipments unless a separate test confirms that exact requirement.
RFQ Checklist
Detail yang dibutuhkan Tempk untuk merekomendasikan packout dingin yang tepat
Send these details so Tempk can check whether this 9L EPS packout is suitable or whether a modified design and sample test are needed.
Persyaratan produk
Allowed temperature range, sensitivitas produk, membekukan risiko, payload weight and product dimensions.
Profil rute
Waktu transit, expected ambient temperature, waktu tinggal gudang, handoff points and final delivery condition.
Packout target
EPS, EPP, PU or reusable preference, tipe pendingin, ukuran kotak, pelabelan, carton requirements and target order quantity.
Rencana pengujian
Required duration, sensor positions, acceptance criteria and whether sample validation is needed before bulk production.
Commercial planning
Sample quantity, estimated monthly volume, shipping destination and packing labor requirements.
Dokumen kepatuhan
Any internal SOP, customer specification or labeling rule that defines the temperature acceptance window.
Buyer Questions
Pertanyaan umum untuk proyek kotak EPS 0-10 °C
Berapa lama packout ini mempertahankan 0-10 °C?
The shortest measured position maintained 0-10°C for 39 jam. The bottom and center positions measured 45.1 jam dan 44.8 jam masing-masing.
Konfigurasi kotak dan pendingin apa yang diuji?
The tested packout used an EPS insulated box with 9L effective payload space and 12 pieces of 500g 0°C biological ice packs.
Apakah ini bisa digunakan untuk semua produk dingin?
TIDAK. It should be used only when the product accepts a 0-10°C window. Products with tighter, frozen or ultra-cold requirements need a dedicated packout and test.
Mengapa ruang muatan efektif lebih kecil dari volume kotak?
The EPS box is listed as 20L, but the tested product space is approximately 9L because the 12 ice packs occupy space inside the packout.
Bisakah Tempk menyesuaikan packout ini untuk rute lain?
Ya. Tempk can compare box size, bahan isolasi, coolant quantity and packing method, then prepare a sample test for the target route and product.
Apa yang perlu dikirim bersama permintaan penawaran?
Send the temperature range, ukuran dan berat muatan, waktu transit, profil lingkungan, tujuan, expected order volume and any required test criteria.
Butuh packout kotak 0-10 °C untuk rute Anda?
Share your product temperature window, muatan, route duration and purchase plan. Tempk can check whether this 9L EPS packout is enough or compare it with modified EPS, reusable EPP, PU or VIP options before sample testing and bulk procurement.
Hubungi Tempk