Reusable and high-performance insulated box programs
Configure the usable payload chamber, Concha EPP, arranjo VIP protegido, lid and handles, cold-source compartments, divisores, posição do registrador, processo de limpeza, rótulos, and repeat-order specification around your product and route.
Prepare your sample request
Select the requirements your quality, logística, Compras, and packing teams already know. The result narrows a starting structure; it does not replace qualification of the complete loaded shipper.
O que precisa ser personalizado?
Choose the right structure
PPE, VIP, híbrido, and collapsible boxes suit different handling and return models. Select a starting structure, then confirm it with the complete payload, fonte fria, rota, e procedimento operacional.
| Starting structure | Good fit when | What can be customized | Confirm before approval |
|---|---|---|---|
| Molded EPP box | The box will be handled, limpo, voltou, and reused on controlled regional routes. | Câmara, parede, tampa, alças, divisor, coolant slots, cor, rótulos, and asset ID. | Loaded handling, limpeza, secagem, empilhamento, armazenamento de retorno, seasonal packout, e regras de aposentadoria. |
| EPP with removable VIP liner | Proteção contra impactos, espaço de carga útil, and replaceable insulation all matter. | Panel geometry, proteção de borda, liner retention, interface da tampa, chamber, and service access. | Panel protection, volume utilizável, cleaning boundaries, inspeção, and replacement procedure. |
| Protected VIP shipper | Cargas úteis de alto valor, outer-size limits, longa permanência, or demanding seasonal exposure justify higher-performance insulation. | Panel map, articulações, tampa, concha protetora, coolant array, posição do registrador, selo, e instruções. | Full and partial loads, perfis de verão e inverno, manuseio, panel inspection, e controle de mudança. |
| Collapsible VPU return box | Empty return volume matters and operators can repeat the foldable assembly correctly. | Linhas de dobra, proteção do painel, encerramento, divisor, posições de refrigeração, etiquetas de devolução, and storage format. | Repetibilidade de montagem, inspeção de componentes, limpeza, treinamento, e tratamento de devolução. |
Build the custom specification
Nominal litres do not show how much product will fit. Start with the packed payload, then reserve fixed space for every thermal and handling component.
Provide dimensions, contagem de unidades, orientação, embalagem secundária, peso, and full or partial load patterns.
Define PCM, pacotes de gel, ou tijolos de gelo, estado de condicionamento, fixed positions, and required separators.
Set logger and sensor positions, start access, seal location, visibilidade do rótulo, e recebendo etapas.
Confirm lid clearance, compressão, travas, limpeza, inspeção, armazenamento de retorno, e peças de reposição.
| Área de especificação | Decisions to provide | What approval should confirm |
|---|---|---|
| Box and insulation | PPE, VIP, híbrido, or VPU structure; dimensões; tampa; alças; travas; concha; proteção do painel. | Ajustar, encerramento, manuseio carregado, empilhamento, panel safety, and the intended operating environment. |
| Payload and cold source | Product envelope, load patterns, divisor, coolant type and state, posições, barreiras, and seasonal variants. | Usable space, montagem repetível, no unintended direct contact, and agreed sensor locations. |
| Identification and operation | Logger access, número de série, selo de violação, rótulos, limpeza, inspeção, quarentena, reparar, e processo de devolução. | Operators can pack, identificar, inspecionar, liberar, and receive the correct configuration consistently. |
| Supply and records | Quantidade, embalagem cartonada, plano de paletes, peças de reposição, desenho, lista de materiais, diagrama de embalagem, and revision. | The production sample and repeat-order records match the approved specification. |
Medical shipment controls
For medicines and vaccines, choose the container and packout from the approved product condition, exposição da rota, procedimento operacional, and evidence required by the buyer’s quality team.
EU GDP connects container selection with product requirements, medicine volume, temperature extremes, maximum transport or customs time, e status de qualificação. It also addresses qualified equipment and separation from cool-packs where direct contact creates risk.
Read Chapters 9.3-9.4WHO lists capacity, peso carregado, coolant model, cold or warm life, and the applicable test protocol for the specific container configuration. A material name alone is not a performance claim.
Review WHO E004ISTA 7E provides heat and cold profiles based on parcel-lane data for use when planning challenges for complete thermal transport packaging systems.
Review ISTA standardsImportante: PPE, VIP, or VPU material does not by itself establish WHO prequalification, Conformidade com o PIB, a universal hold time, or suitability for a specific medicine. Approve the exact loaded configuration and its operating procedure.
From requirements to repeat orders
A caixa, pacote, condições de teste, operating routine, and repeat-order records should move through approval together.
Confirm product limits, carga útil, rota, exposição, modelo de reutilização, recebendo, and acceptance evidence.
Comparar PPE, protected VIP, híbrido, or VPU options using usable space and operating constraints.
Check the chamber, painéis, posições de refrigeração, divisor, acesso ao registrador, encerramento, rótulos, and packing sequence.
Challenge the complete shipper under agreed seasonal, atraso, full-load, partial-load, e condições de manuseio.
Approve cleaning, inspeção, return controls, desenhos, peças, instruções de embalagem, revisão, and reorder code.
Continue your packout planning
Questions before sampling
Não. VIP is one insulation component. Suitability depends on the product requirement, carga útil, rota, fonte fria, condicionamento, separação, monitoramento, procedimento operacional, and accepted evidence.
EPP is often practical for returnable regional routes that prioritize repeated handling, limpeza, recursos moldados, low box weight, and a controlled return process.
Não existe uma resposta universal. Hold time depends on the exact loaded configuration, condicionamento, perfil ambiente, aberturas, rota, e limites de aceitação. Request evidence for the configuration you intend to use.
Compartilhe a condição do produto, payload dimensions and weight, contagem de unidades, route and maximum duration, exposição sazonal, preferred structure, plano de fonte fria, modelo de reutilização, quantidade, and required approval records.
Use the brief above or send the shipment details you already have. Tempk can review the starting structure, sample requirements, and quotation.
