Built around the delivery operation

Bolsas isotérmicas a medida para entrega de alimentos y cadena de frío

Configurar the bag size, aislamiento, transatlántico, divisores, bolsillos de refrigerante, cierre, sistema de transporte, cleaning method and branding around the real load and delivery route.

Build a bag specification
Carry the real loadSize handles, straps and base support for loaded weight.
Control every openingMatch access, dividers and coolant to delivery frequency.
Clean and resetPlan liner surfaces, removable parts and return use.

Prepare a sample request

Crear especificación de bolsa isotérmica a medida

Select the operating conditions and enter the intended loaded size. The result gives Tempk a practical starting point for a sewn sample, material confirmation and loaded route review.

Required loaded space and weightLength x width x height

Include in the custom scope

Provide the largest tray or container, typical order mix, peso cargado, vehicle or rack space, delivery time and cleaning method. Final bag size includes wall build-up, dividers and closure clearance.

Suggested sample direction

Bolsa estructurada para entrega local

    Design from the load outward

    Mantener las piezas de control térmico en posiciones definidas

    A reusable bag changes shape as it is carried, opened and partly unloaded. Divisores, bolsillos, base support and closure should keep the remaining orders and coolant from collapsing into empty space.

    Separar pedidos y temperaturas

    Removable dividers can hold trays upright, create customer order zones or keep chilled items away from products that should not touch coolant.

    Controlar tiempo de acceso

    A wide top opening helps loading; a smaller service opening can reduce disruption during repeated stops. The choice depends on the delivery sequence.

    Fijar el refrigerante

    Pockets or straps prevent gel packs and ice bricks from sliding under trays, blocking the zipper or concentrating pressure on food packs.

    Transportar el peso cargado

    Handle webbing, shoulder anchors, backpack straps and the base panel should be reviewed at maximum load, not only on an empty sample.

    Usar el Coolant and PCM Reference to compare cooling media, then confirm pocket size and quantity with the loaded bag and intended opening pattern.

    Choose the carrying format

    Ajustar acceso y soporte a la ruta de entrega

    The best bag for a restaurant handoff is not automatically the best bag for a motorcycle, a grocery route or a large catering load.

    Hand carry

    Bolsa de entrega estructurada

    Stable walls and a broad opening support meal trays, grocery orders and short car routes.

    Personalizar
    Tray footprint, divider grid, manijas, bandolera, apertura de la tapa, logo panel and coolant pockets.
    Controlar
    Loaded shape, hand clearance, propina, trunk fit and one-handed handoff.
    Bike route

    Mochila de entrega isotérmica

    A vertical bag can fit the rider and vehicle while keeping the load supported through turns and braking.

    Personalizar
    Harness, chest strap, base rígida, internal shelves, rear opening, reflective trim and rack attachment.
    Controlar
    Rider fit, center of gravity, ventilación, acceso con cremallera, tray tilt and vehicle clearance.
    Route delivery

    Bolsa grande o multizona

    Designed for catering, several orders or repeated stops where access and partial unloading become major pressures.

    Personalizar
    Zone dividers, service door, ventanas de etiquetas, base wheels or supports, return ID and cleaning access.
    Controlar
    Maximum lift, remaining-load stability, secuencia de parada, closure cycles and return storage.

    Define the complete sewn product

    Controlar la especificación más allá de color y logo

    A repeatable OEM order identifies fabrics, aislamiento, transatlántico, reinforcements, hardware and workmanship details as one approved construction.

    Artículo de especificaciónChoices to defineWhat to check in the sample
    Loaded chamberUsable length, ancho, altura, tray orientation, divider layout and maximum loadProduct enters and exits without crushing, tilting or preventing full closure.
    capa exteriortela Oxford, nylon, PVC or selected surface; color; abrasion zones; exposición al aguaStitch quality, raspando, manejo mojado, shape recovery and clean appearance.
    AislamientoTipo y espesor de espuma, capa reflectante, panel support and thermal bridge treatmentEven wall build-up, esquinas comprimidas, flexibility and actual usable volume.
    Forro interiorPEVA-style, foil or heavy-duty waterproof surface; método de costura; removable insertLeak path, punción, olor, tinción, wipe-down access and drying time.
    Carry systemHandle webbing, bandolera, backpack harness, anchors, padding and base supportMaximum-load lift, balance, stitch reinforcement and user contact pressure.
    Access and hardwareCremallera, gancho y bucle, hebilla, tamper point, service opening and pull sizeClosure cycles, uso de guantes, snagging, one-hand access and component replacement.
    Brand and trackingMétodo del logotipo, colores de la marca, ventana de etiqueta, bag ID, care label and return markingArtwork position, tener puesto, cleaning compatibility and scan or label visibility.

    Test the operating pressures

    Approve the bag loaded, transportado, opened and cleaned

    Thermal performance is only one acceptance point. A bag that leaks, consejos, hurts the rider or cannot be cleaned will not work as a reusable delivery asset.

    1

    Transporte con carga

    Elevar, walk, ride or place the bag at maximum intended weight. Inspect balance, anchors, base sag and tray movement.

    2

    Ciclo de apertura

    Repeat the planned stop sequence. Check zipper access, closure recovery, divider stability and remaining-load exposure.

    3

    Fugas y limpieza

    Review seams, esquinas, absorbent parts, acceso de limpieza, drying and odor retention with the intended cleaning method.

    4

    Prueba de ruta con carga

    Use real product, refrigerante, starting conditions, ambient exposure and opening events to review temperature and delivery condition.

    Prepare the private-label supply program

    Hacer cada bolsa fácil de identificar, usar y reordenar

    Branding works best when it is tied to a controlled bag size, construction and operating instruction rather than treated as a print-only decision.

    Identidad de la bolsa

    Define the model name, size code, color, método del logotipo, label window and individual or batch identification.

    Información de uso

    Add loading direction, coolant positions, maximum load, cleaning instruction and return contact where useful.

    Suministro a granel

    Approve folded or nested packing, inner quantity, export carton, piezas de repuesto, inspection level and reorder specification.

    From load profile to repeat order

    Desarrollar la bolsa alrededor del uso diario

    Paso 1

    Definir uso

    Share product containers, loaded size and weight, ruta, parada, vehicle and cleaning method.

    Paso 2

    Configurar

    Select bag style, capas de material, apertura, divisores, coolant pockets and carry system.

    Paso 3

    Coser muestra

    Consultar espacio utilizable, loaded balance, acceso, hardware, artwork and workmanship.

    Paso 4

    Realizar prueba de ruta

    Test carrying, opening cycles, limpieza, product condition and temperature where required.

    Paso 5

    Liberar suministro

    Approve the specification, muestra, método de embalaje, inspection points and reorder code.

    Use the connected planning resources

    Comparar formatos de bolsa, refrigerante y condiciones de entrega

    Before requesting a sample

    Preguntas sobre bolsas isotérmicas a medida

    Should bag size be based on outside or usable inside dimensions?

    Start with the required usable internal chamber and the largest loaded containers. The final outside size adds insulation, panel structure, costuras, pockets and closure clearance.

    How do we choose between a tote and a backpack?

    Review the vehicle, walking distance, peso cargado, tray orientation, stop sequence and rider fit. A tote suits many handoffs and car routes; a backpack needs stronger load control and ergonomic review.

    Can one bag carry hot and cold products?

    Separate zones or removable inserts can be considered, but the divider, opening sequence and cross-temperature effect must be tested with the real load. Separate bags may be more practical for demanding routes.

    Which inner liner is easiest to clean?

    The answer depends on food contact controls, productos quimicos de limpieza, seam construction and whether the insert is removable. Review corners, pliegues, drying time and repairability in the sample.

    Can Tempk add our logo and brand colors?

    Sí. Logo methods, fabric color, zipper and webbing colors, etiquetas, ID windows and retail or bulk packing can be specified after the bag construction is approved.

    How should coolant be placed in a delivery bag?

    Use defined pockets, straps or dividers so coolant cannot slide, crush products or block the closure. Quantity and placement should be confirmed with the actual load, route and opening pattern.

    ¿Listo para desarrollar una bolsa isotérmica de entrega a medida?

    Share the load size and weight, delivery mode, detener la cuenta, necesidad de temperatura, metodo de limpieza, branding and order quantity. Tempk can prepare a sewn sample direction and OEM quotation.