Intention de températureFollow the approved product label and build the route around the labeled refrigerated range, communément 2-8 C where required.
GLP-1 Pens Cold Chain Packaging Solution
GLP-1 pen shipments are often high-value, small-payload parcels with demanding customer expectations. The packout should protect the labeled refrigerated range, prevent freezing, support the carton, and reduce risk from delivery dwell or direct coolant pressure.
What the package needs to control
Règle du liquide de refroidissementUse conditioned gel packs or PCM around a protected payload cavity; do not let frozen packs touch pen cartons.
Focus sur l'emballageSmall carton support, protection des étiquettes, delivery dwell risk, and clear unboxing evidence matter for DTC programs.
Choisissez le pack par condition d'itinéraire
| État de l'itinéraire | Packaging setup | Preliminary coolant range | Placement and receiving check |
|---|---|---|---|
| Local or pharmacy courier, 4-8 h | Small EPP or insulated carton, rigid inner tray, side coolant and spacer. | 0.3-0.8 kg conditioned gel packs or PCM for a 0.5-2 Charge utile L. | Confirm carton corners, position de l'enregistreur, and fast handoff. |
| Colis DTC, 8-24 h | Insulated carton or EPP shipper, center cavity, side/top coolant, label/document protection. | 0.8-1.8 kg conditioned gel packs or PCM for a 0.5-3 Charge utile L. | Check minimum temperature, carton crush, état de l'étiquette, et le porche habite. |
| Extended parcel route, 24-36 h | Isolation plus épaisse, balanced coolant, larger buffer area, stronger inner tray. | 1.8-3.2 kg conditioned gel packs or PCM, qualified by route and season. | If direct cold spots appear, revise spacer design before increasing coolant mass. |
Use these ranges as a starting point for packaging review. Confirm the final coolant mass with the approved label, nombre de charges utiles, taille de l'expéditeur, durée de l'itinéraire, profil ambiant, Placement de l'enregistrement, and internal quality procedure.
How Tempk would build the shipment
Protect the small carton first
Use a rigid inner tray or center cavity so coolant and parcel handling do not crush the pen carton.
Séparer le liquide de refroidissement du produit
Conditioned gel packs or PCM should surround the payload cavity while spacer layers prevent direct frozen contact.
Plan for delivery dwell
Home-delivery lanes can sit at the door. Validate the warmest expected dwell, not only the carrier transit time.
Make receiving simple
Use clear logger placement, protected labels, and a neat unboxing sequence so the receiver can review the shipment quickly.
Common failure points to prevent
For medicine parcels, a cold-feeling package is not enough. The receiver needs a documented shipment that stayed inside the required range and protected the product package.
- Freeze excursion from direct gel-pack contact.
- Warm exposure during final delivery dwell.
- Crushed pen cartons in small parcel handling.
- Unclear receiving evidence when logger placement is not defined.
Validation curve and receiving evidence
Review the curve with the actual payload, masse de liquide de refroidissement, taille de l'expéditeur, durée de la voie, et assaisonner. Add receiving notes for carton condition, clarté de l'étiquette, mouvement du produit, and any direct coolant contact.
Related pages for packout planning
Need this medicine route checked before shipment?
Send the product label temperature, Taille de la charge utile, dimensions des cartons, niveau de service, conditions ambiantes, delivery handoff, and logger requirement. Tempk can help compare insulation, packs de gel conditionnés, PCM, couches tampons, inserts, et étapes de validation.