Built around the delivery operation

Custom Insulated Bags for Food and Cold Chain Delivery

Configure the bag size, العزل, بطانة, المقسمات, جيوب المبرد, إنهاء, carrying system, cleaning method and branding around the real load and delivery route.

Build a bag specification
Carry the real loadSize handles, straps and base support for loaded weight.
Control every openingMatch access, dividers and coolant to delivery frequency.
Clean and resetPlan liner surfaces, removable parts and return use.

Prepare a sample request

Build your custom insulated bag specification

Select the operating conditions and enter the intended loaded size. The result gives Tempk a practical starting point for a sewn sample, material confirmation and loaded route review.

Required loaded space and weightLength x width x height

Include in the custom scope

Provide the largest tray or container, typical order mix, الوزن المحمل, vehicle or rack space, delivery time and cleaning method. Final bag size includes wall build-up, dividers and closure clearance.

Suggested sample direction

Structured local delivery tote

    Design from the load outward

    Keep the temperature-control parts in defined positions

    A reusable bag changes shape as it is carried, opened and partly unloaded. فواصل, جيوب, base support and closure should keep the remaining orders and coolant from collapsing into empty space.

    Separate orders and temperatures

    Removable dividers can hold trays upright, create customer order zones or keep chilled items away from products that should not touch coolant.

    Control access time

    A wide top opening helps loading; a smaller service opening can reduce disruption during repeated stops. The choice depends on the delivery sequence.

    Fix the coolant

    Pockets or straps prevent gel packs and ice bricks from sliding under trays, blocking the zipper or concentrating pressure on food packs.

    Carry the loaded weight

    Handle webbing, shoulder anchors, backpack straps and the base panel should be reviewed at maximum load, not only on an empty sample.

    استخدم Coolant and PCM Reference to compare cooling media, then confirm pocket size and quantity with the loaded bag and intended opening pattern.

    Choose the carrying format

    Match access and support to the delivery route

    The best bag for a restaurant handoff is not automatically the best bag for a motorcycle, a grocery route or a large catering load.

    Hand carry

    Structured delivery tote

    Stable walls and a broad opening support meal trays, grocery orders and short car routes.

    تخصيص
    Tray footprint, divider grid, مقابض, حزام الكتف, فتح الغطاء, logo panel and coolant pockets.
    يفحص
    Loaded shape, hand clearance, البقشيش, trunk fit and one-handed handoff.
    Bike route

    Insulated delivery backpack

    A vertical bag can fit the rider and vehicle while keeping the load supported through turns and braking.

    تخصيص
    Harness, حزام الصدر, قاعدة صلبة, internal shelves, rear opening, reflective trim and rack attachment.
    يفحص
    Rider fit, center of gravity, تهوية, الوصول إلى السوستة, tray tilt and vehicle clearance.
    Route delivery

    Large or multi-zone bag

    Designed for catering, several orders or repeated stops where access and partial unloading become major pressures.

    تخصيص
    Zone dividers, service door, نوافذ التسمية, base wheels or supports, return ID and cleaning access.
    يفحص
    Maximum lift, remaining-load stability, تسلسل التوقف, closure cycles and return storage.

    Define the complete sewn product

    Control the bag specification beyond color and logo

    A repeatable OEM order identifies fabrics, العزل, بطانة, reinforcements, hardware and workmanship details as one approved construction.

    البند المواصفاتChoices to defineWhat to check in the sample
    Loaded chamberUsable length, عرض, ارتفاع, tray orientation, divider layout and maximum loadProduct enters and exits without crushing, tilting or preventing full closure.
    القشرة الخارجيةنسيج أكسفورد, نايلون, PVC or selected surface; لون; abrasion zones; التعرض للمياهStitch quality, جرجرة, التعامل الرطب, shape recovery and clean appearance.
    العزلFoam type and thickness, طبقة عاكسة, panel support and thermal bridge treatmentEven wall build-up, زوايا مضغوطة, flexibility and actual usable volume.
    بطانة داخليةPEVA-style, foil or heavy-duty waterproof surface; طريقة التماس; removable insertLeak path, ثقب, رائحة, تلطيخ, wipe-down access and drying time.
    Carry systemHandle webbing, حزام الكتف, backpack harness, anchors, padding and base supportMaximum-load lift, توازن, stitch reinforcement and user contact pressure.
    Access and hardwareسستة, هوك وحلقة, مشبك, tamper point, service opening and pull sizeClosure cycles, استخدام القفازات, snagging, one-hand access and component replacement.
    Brand and trackingطريقة الشعار, ألوان العلامة التجارية, نافذة التسمية, bag ID, care label and return markingArtwork position, يرتدي, cleaning compatibility and scan or label visibility.

    Test the operating pressures

    Approve the bag loaded, نفذت, opened and cleaned

    Thermal performance is only one acceptance point. A bag that leaks, نصائح, hurts the rider or cannot be cleaned will not work as a reusable delivery asset.

    1

    Loaded carry

    يرفع, walk, ride or place the bag at maximum intended weight. Inspect balance, anchors, base sag and tray movement.

    2

    Opening cycle

    Repeat the planned stop sequence. Check zipper access, closure recovery, divider stability and remaining-load exposure.

    3

    Leak and cleaning

    Review seams, زوايا, absorbent parts, الوصول للتنظيف, drying and odor retention with the intended cleaning method.

    4

    Loaded route trial

    Use real product, سائل التبريد, starting conditions, ambient exposure and opening events to review temperature and delivery condition.

    Prepare the private-label supply program

    Make every bag easy to identify, use and reorder

    Branding works best when it is tied to a controlled bag size, construction and operating instruction rather than treated as a print-only decision.

    Bag identity

    Define the model name, size code, لون, طريقة الشعار, label window and individual or batch identification.

    Operating information

    Add loading direction, coolant positions, maximum load, cleaning instruction and return contact where useful.

    العرض بالجملة

    Approve folded or nested packing, inner quantity, export carton, قطع غيار, inspection level and reorder specification.

    From load profile to repeat order

    Develop the bag around daily use

    خطوة 1

    Define use

    Share product containers, loaded size and weight, طريق, توقف, vehicle and cleaning method.

    خطوة 2

    Configure

    Select bag style, طبقات المواد, افتتاح, المقسمات, coolant pockets and carry system.

    خطوة 3

    Sew sample

    تحقق من المساحة القابلة للاستخدام, loaded balance, وصول, الأجهزة, artwork and workmanship.

    خطوة 4

    Run route trial

    Test carrying, opening cycles, تنظيف, product condition and temperature where required.

    خطوة 5

    Release supply

    Approve the specification, عينة, طريقة التعبئة, inspection points and reorder code.

    Use the connected planning resources

    Compare bag formats, coolant and delivery conditions

    Before requesting a sample

    Custom insulated bag questions

    Should bag size be based on outside or usable inside dimensions?

    Start with the required usable internal chamber and the largest loaded containers. The final outside size adds insulation, panel structure, طبقات, pockets and closure clearance.

    How do we choose between a tote and a backpack?

    Review the vehicle, walking distance, الوزن المحمل, tray orientation, stop sequence and rider fit. A tote suits many handoffs and car routes; a backpack needs stronger load control and ergonomic review.

    Can one bag carry hot and cold products?

    Separate zones or removable inserts can be considered, but the divider, opening sequence and cross-temperature effect must be tested with the real load. Separate bags may be more practical for demanding routes.

    Which inner liner is easiest to clean?

    The answer depends on food contact controls, مواد كيميائية للتنظيف, seam construction and whether the insert is removable. Review corners, طيات, drying time and repairability in the sample.

    Can Tempk add our logo and brand colors?

    نعم. Logo methods, fabric color, zipper and webbing colors, تسميات, ID windows and retail or bulk packing can be specified after the bag construction is approved.

    How should coolant be placed in a delivery bag?

    Use defined pockets, straps or dividers so coolant cannot slide, crush products or block the closure. Quantity and placement should be confirmed with the actual load, route and opening pattern.

    Ready to develop a custom insulated delivery bag?

    Share the load size and weight, delivery mode, وقف العد, temperature need, طريقة التنظيف, branding and order quantity. Tempk can prepare a sewn sample direction and OEM quotation.