Red Blood Cells
Protect the refrigerated range while preventing direct frozen coolant contact, bag pressure, label basah, and missing arrival records.
Blood product packaging starts with the component, not the box size. Sel darah merah, trombosit, and fresh frozen plasma need different temperature logic, coolant contact protection, bag support, kendali serah terima, and receiving records.
A universal medical shipper can create real risk when the payload changes. The same coolant that supports red cells can chill platelets, and the dry ice used for frozen plasma can damage bags or documents if it is not separated.
Protect the refrigerated range while preventing direct frozen coolant contact, bag pressure, label basah, and missing arrival records.
Use a no-chill route plan with controlled room-temperature buffers, stable bag support, and short validated handoff windows.
Maintain frozen condition with dry ice or frozen-route support, while keeping bags, Label, and documents away from direct dry ice damage.
| Component route | Maksud suhu | Packaging setup | Coolant or dry ice planning | Menerima cek |
|---|---|---|---|---|
| Sel darah merah, facility-to-facility or courier route | Plan around refrigerated handling, umumnya 1-6 C for storage-aligned control. Avoid freezing and avoid warm handoff delays. | Qualified medical insulated shipper, absorbent secondary containment, bag support insert, coolant barrier, logger near payload but not touching coolant. | Use conditioned refrigerated gel packs or 2-8 C PCM behind a divider. Untuk a 3-8 L pengirim, many trials start around 0.8-2.5 kg coolant; larger lanes require lane testing. | Arrival temperature record, bag condition, no ice contact marks, dry documents, label utuh, and handoff time. |
| Trombosit, short controlled room-temperature lane | Rencanakan 20-24 C handling where required by SOP. Do not use chilled parcel logic. | Controlled room-temperature insulated shipper, bag support, no frozen gel packs, logger at likely warm and cool positions. | Menggunakan 20-24 C PCM only after validation. Untuk paket kecil, trials often start with 0.8-2 kg room-temperature PCM; mild same-day lanes may need insulation and records more than coolant. | No chill exposure, no overheating, stable bag position, durasi rute, handoff notes, and logger curve. |
| Fresh frozen plasma, frozen courier or air lane | Maintain frozen condition, umumnya -18 C or colder for frozen plasma handling. Prevent thaw during transfer and delay. | Frozen medical shipper, dry ice separation layer, rigid bag support, absorbent or leak-resistant liner, vented shipper and documents protected from frost. | Dry ice trials often start around 1-3 kg for short parcel lanes, 3-8 kg for 8-24 jam jalur, and higher for long or hot routes. Use the dry ice calculator and validate with the real lane. | Catatan suhu, frozen arrival condition, no bag puncture or dry ice burn, sisa es kering, dry documents, dan menerima penundaan. |
These are planning ranges for packaging discussion. Final acceptance must follow the blood center, RSUD, laboratorium, kurir, and local regulatory procedure for the exact component and route.
Use the validation curve to compare refrigerated, controlled room-temperature, and frozen behavior before scaling a route. The curve should be reviewed with receiving notes, not as a standalone pass or fail.

Whole blood and cryoprecipitate need separate handling decisions, so they are better handled as focused guides rather than being folded into one generic page.
Controlled refrigerated whole blood transport with bag support, freeze-contact protection, pemantauan, dan catatan.
Frozen cryoprecipitate transport with thaw protection, dry ice separation, container support, dan validasi.
Use these pages to check route risk, pilihan pendingin, struktur isolasi, nearby medical routes, and final packout questions before validation.
Share the component type, jumlah muatan, bag or container size, jangkauan sasaran, durasi jalur, kondisi sekitar, courier steps, handoff limit, dan menerima cek. Tempk can help compare the shipper, tata letak pendingin, support insert, posisi pemantauan, dan rencana validasi.